Oil temperature machine control extrusion unit instead of traditional electric heating and fans cooling method.The daily output of traditional machine is about 4-6 tons; The electricity cost for each ton is about 700 RMB.FlyYou's machine is 8-12 tons. And only about 300RMB/ton.The production capacity and efficiency have been improved by more than 40%.

We have the self-developed automatic screen changer technology. No need to stop and change the screen during the production.The 20 m/roll filter screen can be used continuously for 40-50 days, reducing the standby time and efficient production. 

The cooling roller adopts the special design of sandwich spiral channel, ensure that the roll surface of high-speed production is cooled in place, and the film cooling and shaping effect is good at high speed;  with less pulsation and uniform temperature, so that the film quality is better.

Advance Korean technology of our Horizontal MDO Unit.Stable running during high speed.The stretching part is equipped with servo motors and all oil heating, greatly improving the uniformity and stability of air permeability, greatly reducing the shrinkage rate.

New swing way that Whole Roll Swing in winding part to avoid the film stretching、wrinkles and uneven winding.Controlled by servo motor, excellent flatness of winding roll.The traditional and old-fashioned mainframe swings, causing the mold head to shake, making it difficult to achieve high-speed production, and the casting rubber rollers are prone to damage.

On-line recycling system for edge trim, during the production process, the edge trim can be directly crushed online and recycled to the feeding system, saving raw materials and effectively reducing production costs.

The AB shaft of a winding unit can be turned over very quick,just need about 4-5 seconds, which can effectively reduce the generation of wastage edge and control the production cost.

The high-speed online slitting unit can cut coiled materials in one step, reducing the time waste caused by the two processes, effectively saving labor and shortening the production cycle, and assisting our customer in rapid delivery of goods. The maximum slitting width is 70-80mm.

International brand parts with low failure rate and high-quality thickened wall panel as the machine body.